Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

JOEL Joel's Blog

Tool Test: Which Glue is Better - Epoxy, Yellow Wood Glue, or Liquid Hide Glue


Tool Test: Which Glue is Better - Epoxy, Yellow Wood Glue, or Liquid Hide Glue 4Glue is the most common fastener used in woodworking and it seems that selecting the right glue for the job is typically done by using whatever bottle of glue you have hanging around and without really figuring out which glue is best.

Certain characteristics of glue such as open time are pretty well documented so what we were interested in testing is how the glue holds after it dries. It's a simple question - once the glue dries will the glued joint be strong enough to hold its position or must some other mechanical method of fastener also be used?
We looked at three kinds of commonly used glues: Two part epoxy, Yellow wood glue (in this case Elmers wood glue), and liquid hide glue ( Old Brown - (we also love hot hide glue but we wanted for comparison an out of the bottle solution).

To test this characteristic of glue we needed a type of joint where joint members, even when pinned down, shift position all the time.

Members of Congress seemed perfect for the test.

We took three politicians of various affiliations - our technicians did not think political party mattered because politicians shift positions all the time. Using each glue in turn we glued down each politician to their chair in the House of Representatives.

We left the politicians alone for the duration of the test. At the end of the test (one session) we examined our results.

Epoxy - The representative was still seated and had not shifted his position.
Elmer's Wood Glue - The representative was disqualified when it was discovered that he had no positions on anything and voted on strict donor lines.
Old Brown Liquid Hide Glue - The representative was solidly attached but under the heat of public scrutiny the glue softened and the representative was able to shift position. Fortunately one characteristic of hide glue is that it's reversible and a lobbyist was able to bring the representative back to his original position with little effort.

Conclusion. Epoxy is the way to go if you have the votes going in. Otherwise use hide glue.

Join the conversation
03/01/2011 Steve K
Two important factors weren't mentioned:
Squeeze-out and term limits.
Today's members of the Italian Parliament are better for your test. ;-)
03/01/2011 Mark http://Walters
You hit the nail on the head.
03/01/2011 Andy
Huh - March 1, not April 1...
Entertaining nonetheless!
03/01/2011 Eric R
Were they "stained" by scandal?

And, did you take in to account the thickness of their hides for application?

Thanks Joel
03/02/2011 Stephen Shepherd
Were the glue surfaces toothed? Don't forget to use a fresh cut clove of garlic to prepare the adjoining surfaces.

Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.