Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

JOEL Joel's Blog

How to Saw a Circle with a Circular Saw.


How to Saw a Circle with a Circular Saw. 4Everybody knows that a circular saw cuts a straight line. However what if you want cut a circle? Everyone knows that you can't use a circular saw. But what if you bend the blade?
Yip - that's what they did. Here is a circular saw blade by the Huther Saw Bros. Saw Mfg. Co. of Rochester New York (1880 - 1940). which is carefully dished so that if you mount it in a circular saw, with the saw tilted at the right angle so that the blade is square to the wood, the saw will cut a 6' circle. Not well I am told - these saws were tricky to handle and you needed a different blade for every diameter, but it worked. This particular blade looks like it was never used. The saw pre-dates carbide tipped teeth by a lot. The teeth are carbon steel, swaged a little bigger at the tips for clearance in the cut. The diameter of the saw is just under 12" which makes me think that it started out as a 12" blade before being dished to a slightly smaller diameter.

This blade was made, I think, in the '30's, after the circular saw was invented but before they became ubiquitous. All the major saw blade makers made them, Disston, Atkins, to name a few.

I would love to get a chance to actually use this blade but the concept scares the pants off me. It's also way to big for the two circular saws I have: my old Super Saw Cat from the Industrial Division of B+D back in 1981 and my brand new Festool 55 which I use now.
Add a Comment
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
JOEL Joel's Blog
BEN Built-It Blog
BREN Video Roundup
EVT Classes & Events
WORK Work Magazine
Newer Entries...
JOELCarving a Tudor Rose - 03/23/2008
JOELNaniwa Superstones and a Tip for Flattening Waterstones Less Often - 03/17/2008
JOELShipping - 03/08/2008
JOELBooks on Business - 02/25/2008
JOELOlson Bros. Mach. Tool & Saw Co. Inc. - 02/04/2008
JOELWhat Do You Know about Arthur Price? - 01/13/2008
JOELMerry Christmas to All and to All a Good Night - 12/23/2007
JOELVacation! (Time Off for Good Behavior) - 12/15/2007
JOELStop Chamfers - 12/09/2007
JOELHow to Saw a Circle with a Circular Saw. - 11/27/2007
JOELMy Tool Box Part 3 - 11/18/2007
JOELPOPULAR WOODWORKING's 2007 Best New Tools - 11/09/2007
JOELSplit Nut Screwdriver - 11/05/2007
JOELWhere is My Iron Ore? - 10/28/2007
JOELNorris Saw Collecting - 10/21/2007
JOELMy Tool Box Part 2 - 10/15/2007
JOELMy Tool Box - 09/29/2007
JOELLook at This! Look at That! - 09/05/2007
JOELHow to Use a Marking or Mortise Gauge - 08/25/2007
JOELSharpening your way to better woodworking - 08/18/2007
Older Entries...