Drill Bit Adapters by Make it Snappy - Made in USA

This clever fixture makes it possible to use standard drill bits with an impact driver. One end of the Drill Bit Adapter is a 1/4" hex power bit shank, the other end is a collet specced to fit a certain size drill bit (see the “Specs” tab for decimal-inch sizing). Each size will safely fit a drill bit 1/64" smaller. The piece is heat-treated for industrial durability.

The Adapter Sets ship with drill bits installed, the single Adapters ship without drill bits.

The hex socket fits on the 1/4" bit shank, providing more meat to wrench on when you’re loosening a collet to change out the drill bit while protecting the shank.

Made in the USA

Size	Accepted Range
1/32"	.025" - .040"
1/16"	.047" - .062"
5/64"	.065" - .080"
3/32"	.081" - .096"
7/64"	.095" - .110"
1/8"	.111" - .126"
9/64"	.126" - .141"
5/32"	.144" - .159"
11/64"	.158" - .173"
3/16"	.174" - .189"
13/64"	.189" - .204"
7/32"	.205" - .220"
15/64"	.223" - .238"
1/4"	.237" - .252"
9/32"	.268" - .283"
5/16"	.299" - .314"
3/8"	.362" - .377"