Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

Forged Forstner Wave Bits by Fisch

read 1 review
Fisch Tools | Auger Bits | Jennings Bits | Forstner Bits
Found in Departments: All Kinds of Drill Bits
Forged Forstner Wave Bits by FischForged Forstner Wave Bits by Fischcancelleft arrowright arrow
click to enlarge
/prodimg/ms/thb/MS-FOR_K_thb.jpg
/prodimg/ms/thb/MS-FOR_L_thb.jpg
/prodimg/ms/thb/MS-FOR_B_thb.jpg
/prodimg/ms/thb/MS-FOR_G_thb.jpg
/prodimg/ms/thb/MS-FOR_N_thb.jpg
/prodimg/ms/thb/MS-FOR_E_thb.jpg
/prodimg/ms/thb/MS-FOR_D_thb.jpg

Quantity in Cart: none
Code: MS-FOR.XX
Quantity:
 Set of 7 wave cutters in a Wooden Box ($133.45) In Stock
 Set of 16 in a Wooden Box ($436.95) In Stock
 1/4" ($11.95) In Stock
 5/16" ($14.45) In Stock
 3/8" ($11.95) In Stock
 7/16" ($15.95) In Stock
 1/2" ($14.95) In Stock
 9/16" ($23.45) In Stock
 5/8" ($16.45) In Stock
 11/16" ($25.95) In Stock
 3/4" ($18.95) In Stock
 3/4" - extra long (not wave) ($33.95) Sold Out
(click here to Email Me When Available)
 13/16" ($27.95) In Stock
 7/8" ($19.95) In Stock
 15/16" ($31.95) In Stock
 1" ($23.45) In Stock
 1 1/8" ($25.45) In Stock
 1 1/4" ($25.95) In Stock
 1-3/8" ($37.45) In Stock
 35mm ($37.45) In Stock
 1 1/2" ($38.95) In Stock
 1 5/8" ($40.45) In Stock
 1 3/4" ($42.95) In Stock
 1 7/8" ($45.95) In Stock
 2" ($48.95) In Stock
 2-1/8" ($54.45) In Stock
Quantity:
MS-FOR.XX
Forstner bits were invented in 1874 and are the simplest, best way of drilling a hole with a flat bottom, a hole at an angle, or overlapping holes. These "Wave Cutter" Forstner bits from Fisch are the newest and best drilling technology for this class of bits. Each bit is forged out of a blank of a propriety steel alloy and machined to exacting tolerances. These bits get the clearances right! You can drill quickly, cleanly and without burning in hard or soft wood. The "Wave" innovation is the wavy cut on edge of all bits greater than 1/2". This means that instead of riding on a level cutting edge, as you are drilling your are scoring the wood thousands of times at the cutting diameter. The scored wood is easily lifted out by the drill and you get clean, fast holes.

One huge advantage of the Forstner design is that the bits are edge bearing so that you can easily cut overlapping holes without having the bit wander into a previous hole. This also means that drilling over an edge is easy and reliable as is drilling at an angle.

In addition to a comprehensive set of drill sizes in imperial measurements from 1/4" to 2 1/2" by 1/16" increments to 1" and then in 1/8" increments, we also stock in this listing a non-wave cutter 3/4" (4 3/4" overall) extra long bit for drilling workbenches, and a 35mm wave bit for European style hinges. 35mm is a few thousands larger than an imperial 1 3/8" bit and can be used almost interchangeably but the true 35mm bit we stock will fit hinges a touch better.

We also stock two sets, both boxed in nice fitted wooden cases:

The seven piece set contains sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", and 1".

The sixteen piece set contains sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", and 2-1/8".

All bits (except the extra long 3/4") are approximately 3 1/2" long. Bits 1/4" - 1/2" have 1/4" diameter shanks. All the larger bits have a 3/8" diameter shaft.

The extra long 3/4" bit is 4 3/4" long with a 1/2" shank.

The smallest sizes 1/2" and under are not made wave ground as in these sizes there is no practical advantage.

Forged and then machined from a long-lasting proprietary steel alloy.

Available individually or in sets. Made in Austria.
Customer Reviews:
Mr.
By: Tony Z (Oct, 2018)
These are simply the best Forstner styled bits I've ever used! Used in quartersawn cherry, drilled clea, no-burn holes!
I own this product.

Please contribute your own review:

 
Anonymous reviews will not be published