FESTOOL Percussion Drill Driver

The TPC Cordless Hammer Drill is the powerful and versatile drill you’ll reach for again and again. You’ll have four gears to cover a wide range of applications, from screwing in first gear to drilling at 3600 rpm in fourth gear. Work easily in wood, masonry, plastic or metal, with the strength of the brushless EC-TEC motor and the benefit of an array of attachments, easily used with the FastFix interface. So you can drive screws into wood up to 3/8" x 11-13/16" (10x300 mm), drill in wood up to 2-3/4" (70 mm) with Forstner drill bits, or use the hammer mode to drill in brickwork or masonry.

To protect you from wrist injuries, the drill has a Kickback Stop that minimizes the risk of the drill twisting out of your hand if it suddenly becomes caught or jammed. The Gear positions are clearly marked and there’s a right one for every application: Use first gear for demanding tightening of screws up to 3/8 (10 mm). Second gear supports quick driving up to 5/16 x 11-13/32( 8 x 300 mm) in size. (And this drill has very significantly more torque in second gear than previous Festool drills!) Third gear offers powerful drilling with auger bits of up to 3/4 (20 mm). Fourth gear enables fast drilling with small and medium-sized drill bits for pilot holes.

Thanks to the smart FastFix interface, you can use all of the 18 V attachments from the Festool range with this drill.

The Set (576778) includes the drill, two BP 18 Li 4,0 HPC-ASI battery packs, a Rapid charger TCL 6, Centrotec Chuck, Centrotec BH 60 CE Imp magnetic bit holder, FastFix keyless chuck 1/2" (13 mm), Phillips bit PH2, Additional side-mounted hand grip, FastFix Right Angle Chuck, and belt clip packed in a Systainer SYS3 M 187.

The Basic version (576777) includes the drill, Centrotec Chuck, Centrotec BH 60 CE Imp magnetic bit holder, FastFix keyless chuck 1/2" (13 mm), Phillips bit PH2, Additional side-mounted hand grip and belt clip packed in a Systainer SYS3 M 187. No batteries or charger.