Festool offers an array of accessories to their Guide Rail tracks that help you get the most of the system. You’ll be able to work more precisely and efficiently to get the cuts and routs you want.
The Angle Stop (#577060) lets you set precise angle cuts of -60 degrees to +60 degrees for repeatable accuracy and precision.
The Limit Stop (#491582) sets the stop points on the guide rail for repeat cuts.
The Guide Extension (Metric) (#577041) allows you to extend the Angle Stop.
The Deflector (#204787) helps keep any cords or hoses from catching on the end of the track. The newer model is designed a bit wider than the older style to cover the entire guide rail..
The Combination Angle Unit (#491588) accurately set angles between 0 and 180?° for angled, mitered, or even compound cuts in sheet goods.
Guide Rail Connectors (#577039) let you connect two or more Festool tracks to use with longer workpieces. This model of Connectors comes in a package of two and has a self-aligning function. (You will need more than one package if you are connecting more than two tracks.)
The LR Guide Rail Connector (496938) connects LR rails for precision hole drilling, for example to accurately place shelf pinholes in taller bookcases and cabinets.
The Adhesive Pads for KP rails (#577042) are replacements for the one-time use pads that come with the KP rails. The pads are approximately 4” long and come in a package of 30 pads.
The Bag allows you to store and transport two rails 55” (1400 mm) or shorter.
The Accessory Kit (#577157) set includes the following:
FS-WA Angle Stop
(2) FSV/2 Guide Rail Connectors
(2) Screw Clamps, 4-11/16"
FS/2-AW Guide Rail Deflector
Limit Stop
SW 5/SW 3 combination hex key
Packed in a Systainer SYS3 M 137
Clip one of these adjustable squaring heads onto your track to precisely position it against a reference edge. That simplifies laying out 90 degree cuts and greatly increases accuracy when making long, angled cuts on sheet goods. It also makes it easy to crosscut and miter boards. - Wood Magazine, May 2024
