Flexcut craft carving sets have all the tools you need to get started, and complete your first carving project. Interchangeable blades and comfortable handles, make these sets compact, and high value. Each tool is honed to a razor edge at the Flexcut factory in Pennsylvania so you can start carving right away.
Several sets are made specifically for beginners, but there's nothing compromised about the quality of the tools they contain, and for an experienced carver, the compact size of the sets makes them a reliable but compact travel kit. Expertly heat-treated 1095 spring steel blades, have a small grain structure, and are just the right hardness to hold a keen edge while remaining easy to sharpen.
Our only complaint with Flexcut interchangeable carving tools is that switching handles from blade to blade can get tiresome. We've found that a couple extra handles, kept on our most used blade profiles, are well worth the extra expense. All three handle styles are interchangeable.
Find individual set tool listings on the "Set Contents" Tab Above.
Flexcut Interchangeable Carving Tools are Made in Pennsylvania, USA.
All sets come sharp and ready to carve.
SK106
5 piece Craft Carver Set 
Excellent compact carving set. ABS Handle, Four blades in an 11 pocket carving roll. Basswood leaf blank, and project manual.
Blade Profiles: #3 x 3/8" Gouge, #6 x 5/16" Gouge, #9 x 1.5mm Micro Gouge, 70 deg. x 1/4" V-Tool.
SK107
11 piece Craft Carver Set
A nice set of 10 blades and 1 ABS handle roll up into the most compact carving kit short of a Carving Jack folding knife. Basswood leaf blank, and project manual.
Blade Profiles: #1 x 1/4" Chisel, #3 x 3/8" Gouge, #3 x 5/8" Gouge, #5 x 9/16" Gouge, #6 x 5/16" Gouge, #9 x 1.5mm Micro Gouge, #11 x 1/8" Gouge, #11 x 1/4" Gouge, 45 deg. x 1mm Micro V-Tool, 70 deg. x 1/4" V-Tool
SK108
21 Piece Deluxe Starter Carving Set
The ultimate interchangeable carving set packed in convenient wooden box. 16 blades, 1 cutting knife, 1 ABS handle, 1 wooden power handle, slip strop, honing compound, owners manual covering tool care, and instructional DVD.
Blade Profiles: #1 x 5/8" Chisel, #2 x 9/16" Skew, #3 x 1/4" Gouge, #3 x 7/8" Gouge, #5 x 1/8" Gouge, #6 x 1/2" Gouge, #8 x 1/4" Gouge, #8 x 3/8" Gouge, #8 x 11/16" Gouge, #9 x 9/16" Gouge, #11 x 1/16" Gouge, #11X x 3/16" Gouge, #11X x 1/2" Gouge, 45 deg. x 5/32" V-Tool, SK403 70 deg. x 3/8" V-Tool, SK754 7/8" Back Bent Gouge
SK111
Beginner 2 Blade Set
There's no easier way to get started carving than this. One handle with two blades pre-printed basswood leaf blank, second blank for practice cuts, Project DVD and 24 page manual that details the leaf project as well as basic maintenance and safety tips for beginning carvers.
Blade Profiles: #6 x 5/16" Gouge, 70 deg. x 1/4" Gouge
SK110
Beginner 3 Blade Set
A great introduction to in-the-round carving, that's useful to boot. Set includes Wooden Handle with three blades, basswood boot blank, project DVD and 16 page project guide.
Blade Profiles: #2 x 9/16" Skew, #11 x 1/4" Gouge, 70 deg. V-Tool x 1/4"
