Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

JOEL Joel's Blog

Using Rasps in the Woodshop Can Add Flourishes to Basic Work.


Using Rasps in the Woodshop Can Add Flourishes to Basic Work. 4A few weeks back I did a talk at the monthly meeting of the NYC Woodworkers which was held at Makeville Studio. I'm in sales and I spend far too much time talking about features of tools. Far too many furniture designs are linear and for this talk I wanted to show people the potential of what you can do with rasps to introduce curved and sculpted elements into your work.
I spent a little bit of time on technique. In three sentences or less. Hold the rasp by the handle and the tip - you want to use the entire rasp so you get the fastest, most controlled stroke, and so you wear out the teeth evenly and the rasp will last longer. You also want to cut uphill with the grain. It's like using a saw in that sense (see here for the uphill saw explanation).

Using Rasps in the Woodshop Can Add Flourishes to Basic Work. 5Auriou makes left and right handed rasps for maximum efficiency in cutting. I'm no longer sure how important that is. Gramercy Tools rasps are unhanded. We stock both Auriou and Gramercy Tools and both are hand cut. The slight random spacing of the teeth caused by a human cutting the teeth means for far smoother, faster cutting action because the rasp teeth don't run lock step into the proceeding tooth's cut as they would with a machine cut rasp.

Using Rasps in the Woodshop Can Add Flourishes to Basic Work. 6Then I took a piece of wood and cut a simple chamfer on it in 30 seconds. About the same time it would take to look for a router wrench. Then 30 more seconds and I had a scalloped chamfer which I don't know how to cut with a router. Then a stopped chamfer which would add a lot of interest on a normally square pit of wood. I wrote about stopped chamfers a long time ago. Than a scalloped edge. This would look really cool on the underside of a table. And finally a scallop with a "V" between the scallops. The "V" was done with the edge of a rasp.
Using Rasps in the Woodshop Can Add Flourishes to Basic Work. 7As I told everyone, I wasn't trying to do the perfect design, and even with the very smooth finish left by the rasps, a follow-up with a scraper would be needed to really get a final finish surface. But what I wanted to show is how fast one hand tool could take a rectilinear design and turn it into something special. And something special is what makes custom furniture worthwhile. It's like a restaurant. Serve a plate of spaghetti with tomato sauce it's $9.95. Add two anchovies and a sprig of basil, you can charge $14.95. I'm just an iron monger and this demo just showed the basics. It's your job as craftspeople to make beautiful interesting stuff. Go for it!

PS. Please pardon any inconsistencies in the sample photographs. All the samples were made live in front of the club while I was talking and in thirty seconds or less. At the very least layout lines would make everything more regular if I was working on real stuff.
Join the conversation
01/17/2012 Mitch Wilson
So, what are your go-to rasps, the ones that you make the most use of? 9, 12, 15, big, little, etc.? You've picqued my curiosity. Real nice blog, Joel. (Again.)
01/17/2012 Troy Bonte
Hi Joel,

Thank you for all your posts. I enjoy reading your blog. Please think about video recording your next presentation on rasps. There is still very little content online about them, and I would love to see that information.

01/17/2012 Joe McGlynn
Nice post, I like the details.

Like Mitch mentioned, what are the essential rasps? It's a bit overwhelming with the different sizes, grains and shapes. I remember reading that the grain size has different meanings depending on length -- so a 12 grain in a 12" rasp is a different finish than a 12 grain in a 6". Is that right?

01/17/2012 Jim Thompson
Thanks for the tips. Videos would be great! I use your Gramercy rasps and couldn't be more pleased with the outcome. Very easy to control which allows much more precision than I had ever expected. I'm always finding new uses for them and surprising myself at the time savings and great look.
01/19/2012 Iain White
I also use the Gramercy Rasps, and am very satisfied.

For info, I ordered the following as a "starter set"

CMRASP.C1 Cabinetmaker's Rasp - 9 1/4" x 11 tpi
MRASP.MR-150-10 Hand Cut Modeller's Rasp - 6"
MRASP.RT-150-10 Hand Cut Rat-tail Rasp - 6"
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
JOEL Joel's Blog
BEN Built-It Blog
BREN Video Roundup
EVT Classes & Events
WORK Work Magazine
Newer Entries...
JOELThree Ways That Were Used To Make 19th Century Carved Architectural Molding - 03/20/2012
JOELAnnouncing The Work Magazine Reprint Project - 03/13/2012
JOELDuncan Phyfe's Toolbox. - 03/06/2012
JOELTom Otterness, The Lewis Chess Men and Why We Should All Carve - 02/28/2012
JOELHow to Keep Your Sanders A-Sanding - 02/21/2012
JOELWhen Good Tools Go Bad and Other News - 02/14/2012
JOELHow to Hold an Adjustable Shoulder Plane - 02/07/2012
JOELBut Is It Art? - 01/31/2012
JOELThe Transmission of Power - The Five Epochs of Power Application in Woodworking - 01/24/2012
JOELUsing Rasps in the Woodshop Can Add Flourishes to Basic Work. - 01/17/2012
JOELAre Acme Mfg. Products Really That Bad? - 01/10/2012
JOELCarving With Chris Pye - Next Lessons and a Step Backwards - 01/03/2012
JOELWhy You Should Join the Mid-West Tool Collector's Association - 12/27/2011
JOELHappy Holidays from everyone at Tools for Working Wood! - 12/25/2011
JOEL1869 Franz Freiherr von Wertheim Catalog - Now Online - 12/20/2011
JOELIndia Day and Woodworking In Other Cultures - 12/13/2011
JOELWhat about Isometric Drafting Paper? - 12/06/2011
JOELPeriod Pieces - 11/29/2011
JOELCarving With Chris Pye - First Lessons - 11/22/2011
JOELI'm Giving A Talk On November 30th to the NYC Woodworkers Group: Using Rasps in the Woodshop - 11/17/2011
Older Entries...