Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.

JOEL Joel's Blog

The Transmission of Power - The Five Epochs of Power Application in Woodworking


The Transmission of Power - The Five Epochs of Power Application in Woodworking 4There have been 5 major upheavals in the development of woodworking tools. Each upheaval changed the way woodworking was done, changed furniture styles, and changed the skill level needed to produce professional work. The dates are approximate.

1 - Hand tools mature and become standardized c. 1750-1850.

Aside for the water or wind powered sawmills, which were not ubiquitous, all work was done by hand. With the arrival of the Industrial Revolution quality steel became more available and at much lower prices. Greater availability of tools along with a population explosion greatly increased both the demand for wooden buildings and the demand for furniture. Tool manufacture became the province of highly specialized industrial firms, working out of several major cities; Sheffield and Birmingham topping the list. Centralized manufacture took advantage of new national transportation networks of canals and railroads which drastically reduced the cost of transport and by extension, further reduced the cost of the end product. Regional makers could not compete. Tool designs standardized. The lowered costs of tools made it possible for more people to answer the demand for wooden products successfully and the standard of finished work became higher and fancier. However all furniture and house construction involved skilled labor working fast.

2 - Water and steam powered machinery - the Age of Belt Transmission c. 1840-1920
As the Industrial revolution matured precision machines allowed for the construction of the first woodworking machinery. The machines were large, belt driven, and required a lot of capital to obtain, and specialists to maintain. The latter limitations made machinery impractical for smaller shops but in the United States, especially for furniture making, the factory system became the norm and furniture became a factory made item that the middle class could afford instead of purely a bespoke industry for the rich. As the nineteenth century wore on the middle class no longer bought simple joiner's furniture. Instead they bought fancy factory made versions of the latest styles made for the rich.
In house construction the biggest change comes in the 1840's with the introduction of inexpensive, pre-sawn lumber in standard sizes, which completely changes American architecture away from traditional timber framing. While previously standard sized timbers were used for most construction the introduction of framing with 2" x 4" standards greatly lowered the skill level needed for house construction. Fairly early on moldings and other worked details are made by machine. Later in this period pre-made door and windows further standardize construction and lower the needed skill to build a house. The United States was a leader in developing highly specialized machinery for production work in the furniture industry. In England some industrialization took place but there was far more reluctance to industrialize as the piecework system made it impractical for investors. Capital was also much harder to get. Even as late at the 1930's mid-price furniture in London was made by small workshops working with hand tools only. However these shops would take their wood to the local lumberyard for planing.
The picture at the start of this blog entry is of a early planing machine from the early 1850's. While I don't know if this machine was ever built, at this time machinery like this would be found only in saw mills, very large lumberyards, and in the US, large factories.

3 - Stationary electric motors c. 1920-1960
With stationary electric motors it became possible for small shops to have "machine rooms" and compete with the giant factories. No longer did you need an expert to run a system of pulleys from a central location. Each machine needed could be installed independently, anywhere there was electric power.

4 - Portable Power Tools - c. 1940-1990
The boom in housing after WW2 put a huge strain on the national capacity for building housing. Motors became small enough to make hand held tools and for the first time a portable circular saw, drill, and jig saw could replace hand tools on a job site. Most important of course was that far less skill was needed to use power tools than maintain hand tools in productive condition, so lesser skilled craftsman could be employed. In addition, plywood and other materials that would easily dull hand tools could now be readily used on their own and plywood and other sheet goods replace solid timber wherever possible. Cordless tools, popular since the 1980's have increased the versatility and productivity of on-site building equipment.

5 - Prefabrication and outsourcing. 1980 - The real change in production since the 1980s has been increased use of prefabricated parts. Even framing elements are routinely assembled in a factory and trucked in. That idea, but overseas outsourcing has moved a lot of the core furniture making and building elements overseas. Architectural woodworking for most Americans is no longer the work of a skilled cabinetmaker making a kitchen or library. The actual woodworking is now done at a factory and except on the high end, prefabricated, machine made parts are just assembled at the job site. Furniture is less and less a work of a cabinetmaker or a woodworking factory and more an advanced, automatic production of composite materials and high tech. Furniture, which used to be an expensive capital investment for any family is increasingly a commodity item that you buy, use, and discard like an item of clothing. Most Americans have very little connection to new furniture built in a traditional manner.

Join the conversation
It's kind of an unhappy ending, isn't it?

How about: 6, Woodworkers rediscover power in their own muscles, and a new age of hand tool woodwork begins...
01/24/2012 Robert Demers
Good time synopsis capsule history of WW, Joel.
It captures the essential of the major shift in our rich WW history. Well written.
PS small typos :-(;
01/24/2012 Fred West
Joel, thank you as that was really informative. I do agree with Rob though that maybe a subcategory of 5A or 6 could be added for the whole DIY/woodworker shift that has happened. Granted we are small in comparison to the big five but I believe that we are still quite significant. Thank you again, really makes you think.
It really saddens me to see how progress de-values things. Started teaching woodshop in 1977 and saw the trend go towards technology and computers instead of mind and muscle. Small bit of hope now that I'm retired and teach traditional hand tool work. My wife works in a clothing store and there the clothing is cheaply made of inferior quality materials. So sad that we have become a "throw away" society. Small bit of hope when I'm commissioned to do some quality work but few and far between. Thanks for an interesting blog post Joel.
01/24/2012 Danny Hellyar
Well written Joel ! It just makes me want to cry ! Perhaps someone will make a movie titled, "Death of the Craftsman".
01/24/2012 Caocian
As much as I'd like to agree that the amateur hand=tool woodworking trend will make a difference, I doubt it's large enough to be of any real consequence. The real Number Six may well be the advent of affordable CNC technology that unleashes creativity at the home-shop level.
01/24/2012 Michael Trangaris
There will always be a place for the high end craftsman because you just can't get art from a machine!
01/25/2012 Patrick Szymanski
Excellent post! I, like many others of us, see #5 as the most problematic - essentially, the removal of the skilled craftsman from the equation entirely. Upon initial survey, the future appears dim...will the engineers and designers who program CNC machines be the only ones to put their creative fingerprint on offerings of furniture, with the "woodworkers" relegated to "pushing the START button"?!

We should not lose hope, however - consider the analogy of the organic farming movement. People are essentially willing and happy to pay more for organically grown, and most often, local produce that they either receive from a CSA share or at a farmers market. It is a special kind of person who seeks this sort of thing out, but the numbers of these special people are growing, as more and more realize that (low) price is not the only, or even the most important, factor that determines the value of the things we live with, be they food or beds, steaks or chairs.
03/21/2012 Andy Kowalczyk
Your stage 3 - Stationary electric motors c. 1920-1960 reminded me of when I first read this:

You can look back at old Sears catalogs and see ads for small electric motors pitched as a general purpose problem solver (just like personal computers, etc, today).

But it really reminds me of my dad, and how when he started remodeling the attic and basement in our house in the 1950's , he would get a "found" electric motor, an arbor, and a belt, and built a table saw out of 4x4 2x6 and plywood. I had the impression this was not uncommon - jobsite building of tools seemed typical.
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.