BT&C 4/4 Wood Glue

Brooklyn Tool & Craft's 4/4 Wood Glue is a wonderful white PVA glue that is ideal for interior joinery applications. This glue used to be available only to large furniture factories but is finally now available in sizes appropriate for the amateur and custom cabinet shops.

4/4, pronounced “four-four,” goes on easily, is easy to spread, offers superior bond strength with a strong initial tack, and in thin coats dry virtually clear.

While we think of PVA (polyvinyl acetate) adhesives as non-traditional, these glues have been in use since the early middle of the 20th century. Our glue is a throwback to the time when PVA glue was only available to industry. Up to now it has only been available in giant sized pails and drums for industrial woodworking companies. But the same features that make it attractive to manufacturing make it desirable to all woodworkers.

• High strength: Yup!
• Fast set up. If you are working in your basement or in a cabinet shop, you want to be able to clamp something up, and then after a fairly short amount of time - 30 minutes - take off the clamps and clamp something else up.
• Easy clean up. 4/4 wood glue is thinner and easier to spread than most of its competition. Applying a thin layer is much easier -- and so is clean up. A wet rag will clean up most of the glue.
• Clear drying. Thin layers of the glue will dry nice and unobtrusive.

The glue’s open time is approximately 5 minutes depending on the material. Clamps can usually be removed after 30 minutes; full strength comes overnight.

As with PVA glues in general, most stains will not penetrate excess glue.

Non-toxic. Cleans up with water.

Do not let freeze.

Made in the USA.